ECAM Web Tool

Tier A - Initial assessment — Estimation of GHG emissions

Main
General info
Configuration
Population
Tier A - Initial assessment
Tier B - Detailed GHG assessment
Water supply
Abstraction
Treatment
Distribution
Wastewater
Collection
Treatment
Discharge/Reuse
Faecal Sludge Management
Containment
Treatment
Reuse/Disposal
Summaries
GHG Summary
Energy Summary
UNFCCC categories
All substages
All inputs
All outputs
All calculated variables
All questions
All constants
All benchmarks
Other
Opportunities
Export
Sankey diagram
Go to variable code

Cache

▼ Water supply 0 / 0
Energy consumed from the grid (Abstraction+Treatment+Distribution)
Volume of fuel consumed
Volume of water injected to distribution
Running costs
Energy costs
Stage not active. Go back to Configuration to activate it.
▼ Wastewater 0 / 0 / 0
Stage not active. Go back to Configuration to activate it.
Energy consumed from the grid (Collection+Treatment+Discharge)
Volume of fuel consumed
Volume of treated wastewater
Volume of discharged effluent to water body
Average Total Nitrogen at discharge
Running costs
Energy costs
Are you producing biogas from anaerobic digestion?	No Yes
Are you valorizing biogas?	No Yes
Select main treatment type
Select sludge disposal method
▼ Faecal Sludge Management 0 / 0
Stage not active. Go back to Configuration to activate it.
Energy consumed from the grid in FSM stages
Volume of fuel consumed (transport)
Containments emptied
Is the containment experiencing flooding or groundwater infiltration?	No Yes
Main containment type
Main treatment type
Main disposal type
Type of faecal sludge disposed
Are you producing biogas from anaerobic digestion?	No Yes
Are you valorizing biogas?	No Yes

The reset button does several things:

Sets the tier B values to 0, except the tier A ones.
Sets "Are you producing biogas?" to "No".
Sets "Are you valorizing biogas?" to "No".
Sets "Select main treatment tye" to "None".
Sets "Select sludge disposal method" to "None".
Sets the 4 options for Faecal Sludge Management to default (Containment type, treatment type, disposal type and type of faecal sludge).

All the inputs that have estimations are set to zero:

Wastewater estimations set to 0:
- Biogas produced = 0
- Percentage of methane in biogas = 0
- Biogas valorised = 0
- Biogas flared = 0
- Influent BOD load = 0
- Effluent BOD load = 0
- BOD removed as sludge = 0
- CH4 emission factor = 0
- Sludge produced in WWTPs = 0
- Dry weight in sludge produced = 0
- Sludge composted = 0
- Sludge incinerated = 0
- Sludge sent to land application = 0
- Sludge sent to landfilling = 0
- Sludge stockpiled = 0
- Fluidized Bed Reactor Temperature = 0
Faecal sludge management estimations set to 0:
- Influent BOD load = 0
- CH4 emission factor = 0
- Faecal sludge density = 0
- Volume of faecal sludge emptied = 0
- BOD concentration of faecal sludge = 0
- BOD removed as faecal sludge = 0
- Effluent BOD load = 0
- BOD removed with excess sludge = 0
- Biogas produced = 0
- Biogas valorized = 0
- Biogas flared = 0
- Methane in Biogas = 0
- Dry weight sent to landfill = 0
- Dry weight sent to land application = 0
- Volume of faecal sludge dumped = 0

Then, the estimations will be recalculated again refilling the input fields and the options.
Note that this button does not affect the possible substages that the user may have created previously.